Carpentry & finish work

Carpentry & Finish Work in North & Central New Jersey

Crown molding, wainscoting, casings, and the rot repair that has to happen before the paint. One crew, one standard.

The Sterling standard

The trim is what makes a painted room look finished.

A freshly painted room with chewed-up baseboard, or a crisp exterior with a rotted window sill, is a job half done. We handle the carpentry that makes the paint make sense: crown molding, wainscoting panels and frames, chair rail, baseboard, window and door casings, door hanging, and repair of damaged or missing trim. Joints are coped or mitered tight, nail holes filled, everything caulked and primed before the first finish coat, so the paint lands on woodwork that deserves it.

On exteriors, this matters even more. Painting over rot just hides a problem that keeps eating the wood. Before any exterior repaint we probe sills, trim, fascia, and corner boards, and we cut out and replace what is soft, often with PVC or primed cedar that will outlast the original. It is the difference between a paint job that protects the house and one that decorates the damage.

Because the same company does the carpentry and the painting, there is no finger-pointing between trades and no schedule gap. Written proposal within 48 hours covering both scopes, backed by our 2-year written workmanship warranty. Veteran-owned and building it right since 1998.

✓ Backed by our 2-year written workmanship warranty

How we do it

Our finish carpentry process.

Measure, Build, Fill, Prime, Finish

Walk & Measure

We walk the space with you, agree on profiles and layout, and measure everything. Wainscoting and crown get laid out on paper before a single cut.

Repair & Replace

Damaged trim, soft sills, and rotted exterior boards cut out and replaced with sound material: primed cedar or PVC outside, matched profiles inside.

Install

Crown, chair rail, wainscoting, casings, and baseboard installed with coped and mitered joints that stay tight, fastened to framing, not just drywall.

Fill, Caulk & Sand

Every nail hole filled, every seam and wall joint caulked, everything sanded. This is the step that separates finish carpentry from rough carpentry.

Prime & Paint

All new and repaired wood primed, then finish-coated in a durable trim enamel, typically Benjamin Moore Advance in semi-gloss, by the same crew.

Common questions

Carpentry and finish work questions.

Do you repair rotted wood before exterior painting?

Yes, and we insist on it. We probe sills, fascia, and corner boards during the estimate, and anything soft gets cut out and replaced, often with PVC that will not rot again, before primer or paint goes anywhere near it.

Can you install wainscoting or just repair existing trim?

Both. We build and install new wainscoting panels and frames, chair rail, and crown molding, and we also repair or match existing trim, including tracking down or replicating older profiles in pre-war homes.

Is the painting included with the carpentry?

It can be, and usually should be. One crew handles the carpentry, filling, caulking, priming, and finish coats, so there is no coordination gap and one warranty covers the whole result. Your proposal prices both scopes clearly.

How much does crown molding or wainscoting cost?

Chair rail in a dining room often runs $400 to $800. Full-room wainscoting typically starts around $800 to $2,000 and up depending on panel style and linear footage. We put exact numbers in writing after the on-site visit.

Popular areas for carpentry and finish work: Boonton, Mountain Lakes, Long Valley, Roxbury, Warren, Budd Lake, or see all service areas.

Ready for a straight answer and a written price?

On-site visit. Written proposal within 48 hours. No obligation.

Get My Free Estimate Or Call / Text Bill